I-Panoramic Imaging CBCT Inkqubo yamazinyo umatshini we-x ray wamazinyo ukwenzela utyando lomlomo

I. isicelo

PLX3000A is widely used for dental CT diagnostic with 12cm*15cm flat panel detector, mainly for oral and maxillofacial surgeries, orthognathic surgeries, plant department and other dental department in hospitals.

 II. Technical Suqobo

1. Umvelisi

1. I-Anode Voltage: 60-92 kV

2. I-Anode yangoku: 1-15 mA

3. Ubuninzi bemveliso yamandla: 1.38kW

4. Uluhlu lweParameter: 60-92kV, 1-15mA

5. ulwazi Bonise: kV, mA, Aukuhla &Dindawo yokunyuka, Lisibonakaliso se-aser, uphawu lomntus

2. X-reyi Tube

1. Imodeli: D-054SB (Toshiba)

2. Ugxininiso: 0.5mm

3. Umthamo we-Thermal: 35kJ (50kHU)

4. Imo yeradiyografi: I-Cone Beam CT

3. Imaging System   THALES Flat Panel Detector

1. Ubukhulu: 12cm * 15cm

2. Ubungakanani bePixel: 150um

3. 3D reconstruction size: φ80 *90 mm

4. Resolution: 1280 *1024

5. Scanning angle: 200°

6. Scanning time: 18s

7. Exposure time: 4-8s

8. Scanning frame: 400 Frames

9. 3D Reconstruction time: ≤18s

10. Volumepixel size: 0.2 mm

11. A/D Gray scale: 14bit

12. Acquisition mode: Pulse fluoroscopy

13. Detector type: CMOS

14. pixel: 960 * 786

15. Image resolution: ≥3.1lp/mm

4. Ukusebenza koomatshini

1. Vertical up & down stroke: 1000mm

2. Noise for ascending & descending:<70dB

3. Anticollision: Yes

4. Ubunzima: 260kg

5. Appearance size: 788*1090*2200mm

6. Power supply: 220V, 50/60Hz, 2kVA

7. Radiography room requirements: ≥5m², 2mm lead equivalent

III. Ulungelelwaniso

IV. Iimbonakalo

1. PLX3000A Panoramic Digital system is a kind of oral X-ray digital tomography System, it dedicated to the oral and maxillofacial area imaging, and it takes use of the “Tapered beam” Scanning three-dimensional imaging technique.

2. PLX3000A is used for getting the high contrast geometric information in the maxillofacial area during diagnostic process, and it can be used for:

A. Mandible / frontal imaging

B. Nose surface/ fistula and maxillofacial imaging

After Three-dimensional reconstruction, it can produce slice group and build the Three-dimensional reconstruction model. After this progress, axial slice group constituted volume data. With these data, the machine can real-time display the coronal and sagittal view of the reconstruction model. After defining the area of interest, users can create research data with the volume data. The area of interest can keep the tilt angle with the volume data to get vertical image and to correct the positioning error.

3. The equipment could create panoramic, axial surface, and 3D images according to the data research, and it has the function of distance measurement, angle measurement, mark and so on.

4. The equipment could construct the scanning objects at random, no need to reconstruct along axis, and no need to reformat the data.

5. The equipment has advantage of construction and maintenance, while using the same scanning time, it requests lower output power of x-rays & x-ray tube & scanning device.

6. Images could be printed and stored as test reports.

Wamkelekile kwiSanty Medical Solutions!

Iqela leSainty International ngumboneleli wehlabathi jikelele wezisombululo zonyango onamava ekukhonzeni amashishini ezonyango kunye noxilongo.

Abathengi bethu kwihlabathi liphela, bevela kumazwe angaphezu kwama-40 kunye nemimandla. Sibonelela abathengi bethu ngezixhobo zonyango ezisetyenziswa kanye, izixhobo, ukunxitywa kotyando, izinto zamazinyo kunye nezixhobo ezikhusela abantu kunye negalelo ekuphuculeni umgangatho wobomi babo.

Kwimeko apho unazo naziphi na iimfuno ezithile, nceda uzive ukhululekile ukuqhagamshelana neqela lethu lezentengiso elinamava ukuze lisebenze ngokusondeleyo nawe ukuze likubonelele ngeemveliso ezikumgangatho ophezulu ezinexabiso eliphezulu!