All Categories

Dental Glass Ionomer Cement Equipment for Dental Restoration and Veneers



  • Description
  • More Products
  • Inquiry
Description
Product Description
003-02-6.jpg

Specification
item value
Place of Origin China
- Jiangsu
Brand Name MDT
Material Glass-Ionomer Cement
Shelf Life 1 years
Quality Certification ISO
Instrument classification Class II
Safety standard ISO
Selling Point

1.Composition.
Powder composition:Silicon oxide, calcium fluoride, sodium fluosilicate, alumina, aluminum phosphate.
Liquid component:Polyacrylic acid, tartaric acid, deionized water.

2.Usage:
It is recommended to use onyx mixing knife or plastic mixing knife to mix the products on the glass plate.
Operation environment: recommended to be used under the temperature of (23±1)℃ and relative humidity of (50±10)%. High temperature will accelerate the curing process of the product and shorten the working time. If you want to use the product in a warmer place, it is recommended to use a cooler glass plate.
The recommended powder/liquid ratio is: 2.00g:1.00g (1 tsp/2 drops); the test powder/liquid ratio is: 2.00g:1.00g (1 tsp/2 drops). The product needs to be made under the condition of temperature of (23±1)℃ and relative humidity of (50±10)% for testing.
The penetration rate of powder and liquid:
When mixing, first shake the powder in the bottle, use a spoon to scoop the powder slightly beyond the surface of the spoon, then use a mixing knife to scrape the powder to the edge of the spoon and pour it onto the mixing paper; invert the bottle vertically, with the mouth of the bottle about 5mm away from the mixing paper, and squeeze out two drops of the liquid steadily and slowly; if bubbles appear, gently tap the bottle by hand to make the bubbles rise up and leave the bottle's mouth when inverting the liquid bottle.
When mixing, first divide the weighed powder into three equal piles, add the first pile of powder into the liquid, and control the mixing time within 10 seconds; add the second pile of powder, and control the mixing time within 15 seconds; and finally add the third pile of powder, and mix it sufficiently so that the powder and liquid are mixed evenly and then can be used.
Blending time: The entire blending process should be completed within 60 seconds.
Working time: from the beginning of the blending meter, control within 90 seconds.
Net curing time: 1.5~6 minutes.
Before use, the surface of the tooth surface and the bottom of the cushion and cavity lining tissue surface and orthodontic accessories for surface treatment, cleaning, disinfection, drying. Never be re-contaminated by saliva.
In the case of deep pulp, cover the dentin closest to the pulp with zinc oxide eugenol cementum to avoid acidic irritation.
Post-treatment: Remove excess material with a damp cotton ball immediately after filling in place; polish after 24 hours of curing.

3. Storage conditions:
Placed in a dry place at 10~23℃ for storage, the product can get the best use effect.
Long-term storage at high temperature and humidity will shorten the use period of the product and affect the effect of product use.
4.Term of use:
Two years. See package for production date.
5. Precautions:
 It is recommended not to use a metal mixing knife to avoid discoloration of the water portal.
 Immediately after use, please tighten the cap, moisture has an adverse effect on the nature of the watermend.
 Liquid due to storage reasons may produce change light yellow, does not affect the performance of the product, can still be used.
6.Warning:
Avoid contact with eyes. In case of contact with eyes, please flush with plenty of water immediately and then seek medical attention.
Please store in a place not easily accessible to children.
This product is provided in pairs of packages and single powder, single liquid packages of powder and liquid, and shall not be mixed with other brands of powder and liquid.

 

Certifications

0899d2240f261a8682b680a2fd1ea9701d6e3e4d9e5c7ba7c8ba3067b77c4fa44a98bea96d2f84d09e07188780c5b 

FAQ

FAQ
1. who are we?
We are based in Jiangsu, China, start from 2006,sell to North America(26.00%),Southeast Asia(21.00%),South America(17.00%),Eastern
Europe(16.00%),Africa(5.00%),Mid East(4.00%),Western Europe(3.00%),Southern Europe(3.00%),South Asia(1.00%),Eastern Asia(1.00%),Oceania(1.00%),Central America(1.00%),Northern Europe(1.00%),Domestic Market(0.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
3.what can you buy from us?
Dental Material, Medical Disposable, Laboratory Supplies, Medical Device
4. why should you buy from us not from other suppliers? HARD WORKING TEAM TO SERVE YOU ALL THE TIME! YOUR SATISFACTION IS OUR CONSTANT PURSUIT.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF; Accepted Payment Currency:USD; Accepted Payment Type:T/T,L/C,MoneyGram,Western Union; Language Spoken:English,Chinese

About Us

05f3228f9b779c916e676209fd3df6d9987cc127b2893327a819f0410ae80aQQ20240628133650.png 

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

Inquiry

Name
Email
Country/Region
Mobile
Message
0/1000