Ìomhaigh Panoramach CBCT Inneal x-ghath fiaclaireachd siostam fiaclaireachd airson lannsaireachd beòil

I. iarrtas

PLX3000A is widely used for dental CT diagnostic with 12cm*15cm flat panel detector, mainly for oral and maxillofacial surgeries, orthognathic surgeries, plant department and other dental department in hospitals.

 II. Technical Ssaoghail

1. Gineadair

1. Anode Voltage: 60-92 kV

2. Anode current: 1-15 mA

3. Max.output power: 1.38kW

4. Parameter range: 60-92KV, 1-15mA

5. fiosrachadh taisbeanadh: kV, mA, Ascending &Descending position, Laser indication, human features

2. X-ray Tube

1. Model: D-054SB (Toshiba)

2. Focus: 0.5mm

3. Thermal capacity: 35kJ (50kHU)

4. Radiography mode: Cone Beam CT

3. Imaging System   THALES Flat Panel Detector

1. Meud: 12cm * 15cm

2. Meud picteil: 150um

3. 3D reconstruction size: φ80 *90 mm

4. Resolution: 1280 *1024

5. Scanning angle: 200°

6. Scanning time: 18s

7. Exposure time: 4-8s

8. Scanning frame: 400 Frames

9. 3D Reconstruction time: ≤18s

10. Volumepixel size: 0.2 mm

11. A/D Gray scale: 14bit

12. Acquisition mode: Pulse fluoroscopy

13. Detector type: CMOS

14. Pixel: 960 * 786

15. Image resolution: ≥3.1lp/mm

4. Coileanadh Meacanaigeach

1. Vertical up & down stroke: 1000mm

2. Noise for ascending & descending:<70dB

3. Anticollision: Yes

4. Cuideam: 260kg

5. Appearance size: 788*1090*2200mm

6. Power supply: 220V, 50/60Hz, 2kVA

7. Radiography room requirements: ≥5m², 2mm lead equivalent

III. Configurations

IV. Feartan

1. PLX3000A Panoramic Digital system is a kind of oral X-ray digital tomography System, it dedicated to the oral and maxillofacial area imaging, and it takes use of the “Tapered beam” Scanning three-dimensional imaging technique.

2. PLX3000A is used for getting the high contrast geometric information in the maxillofacial area during diagnostic process, and it can be used for:

A. Mandible / frontal imaging

B. Nose surface/ fistula and maxillofacial imaging

After Three-dimensional reconstruction, it can produce slice group and build the Three-dimensional reconstruction model. After this progress, axial slice group constituted volume data. With these data, the machine can real-time display the coronal and sagittal view of the reconstruction model. After defining the area of interest, users can create research data with the volume data. The area of interest can keep the tilt angle with the volume data to get vertical image and to correct the positioning error.

3. The equipment could create panoramic, axial surface, and 3D images according to the data research, and it has the function of distance measurement, angle measurement, mark and so on.

4. The equipment could construct the scanning objects at random, no need to reconstruct along axis, and no need to reformat the data.

5. The equipment has advantage of construction and maintenance, while using the same scanning time, it requests lower output power of x-rays & x-ray tube & scanning device.

6. Images could be printed and stored as test reports.

Fàilte gu Sainty Medical Solutions!

Tha Sainty International Group na sholaraiche fuasglaidhean meidigeach ùr-ghnàthach cruinneil le eòlas ann a bhith a’ frithealadh nan gnìomhachasan meidigeach agus breithneachaidh.

Tha ar luchd-ceannach air feadh an t-saoghail, bho barrachd air 40 dùthaich agus sgìre. Bidh sinn a’ toirt seachad innealan meidigeach aon-chleachdadh don luchd-dèiligidh againn, co-phàirtean, aodach lannsa, stuth fiaclaireachd agus ionnstramaidean a dhìonas daoine agus a chuireas ri bhith a’ leasachadh an càileachd beatha.

Ma tha riatanasan sònraichte sam bith agad, na bi leisg fios a chuir chun sgioba reic eòlach againn gus obrachadh gu dlùth còmhla riut gus toraidhean àrd-inbhe cosg-èifeachdach a thoirt dhut!